Music Note Finder

Identify one musical note from your microphone, a frequency in hertz, or an on-screen piano—then see its tuning, piano key, and every matching guitar position.

Runs privately in your browserNo recording or upload

Use your microphone as a tuner

Allow microphone access, then play a single sustained pitch near your device. Chords and full songs are intentionally not analyzed here.

A4 reference pitch

Recalculate note tuning for a different concert pitch.

Your note will appear here

Start the microphone and hold one steady pitch. Silence stays blank instead of producing a false note.

Standard guitar positions

Every match from open string to fret 12

Standard tuning is E2, A2, D3, G3, B3, E4. Amber markers show every place the detected pitch occurs in the first octave of the neck.

StringOpen123456789101112
E2
A2
D3
G3
B3
E4
Private pitch analysis with no upload

From a sound in the room to the exact note in front of you

A frequency such as 277.18 Hz is useful to a meter, but a musician needs to know that it is C sharp 4, also called D flat 4, how close it is to the chosen tuning reference, and where to play it. Music Note Finder brings those pieces together in one local browser tool. It is deliberately focused on a single pitch, so the answer stays immediate, explainable, and connected to real instruments.

More than a note-name display

Measure the pitch, understand its tuning, and carry the answer onto a keyboard or guitar without switching between separate calculators.

Hear a pitch and name the note

Turn on the microphone and hold one clear pitch from a voice or instrument. The browser analyzes a short rolling waveform, rejects silence and low-confidence noise, smooths small fluctuations, and shows the nearest equal-tempered note without recording a file. The supported live range runs from 55 Hz to 2,093 Hz, covering low A on a bass through C7.

Hear a pitch and name the note

Connect the answer to a piano key

A note name becomes easier to understand when you can see it. The result highlights the matching key on a C2-to-C6 keyboard, and the piano input lets you reverse the process: click any key to inspect its note name, octave, MIDI number, and exact frequency under the selected concert-pitch reference.

Connect the answer to a piano key

Find every matching guitar position

The fretboard maps the detected pitch across standard six-string tuning—E2, A2, D3, G3, B3, and E4—from each open string through fret 12. Instead of giving you one suggested fingering, it marks every exact unison position so you can compare strings, choose a practical location, and understand how the same pitch repeats across the neck.

Find every matching guitar position

Keep microphone audio on your device

There is no upload, account, API request, or hidden recording step. The microphone stream connects directly to the browser's Web Audio analyzer, and it is stopped when you leave the microphone tab or close the page. Frequency entry and piano-key lookup work without microphone permission at all, and the page remains useful offline after it has loaded.

Keep microphone audio on your device

Cents and target frequency

See sharp, flat, or centered

Five A4 references

From 415 Hz through 443 Hz

Browser-only analysis

No audio leaves the device

How to identify a musical note

Start from sound, frequency, or keyboard position and arrive at the same complete note result.

01

Choose how to provide the pitch

Use a live microphone for a voice or instrument, type a frequency from 55 to 4,186 Hz, or click a piano key between C2 and C6.

02

Set the reference and read the result

Choose A4 at 415, 432, 440, 442, or 443 Hz. The finder recalculates the nearest note, target frequency, MIDI number, and cents deviation immediately.

03

Locate the same pitch on instruments

Use the highlighted piano key and guitar fret markers to move from an abstract frequency to a playable position you can practice, tune, or arrange.

Useful when one pitch matters

Practice intonation, learn the fretboard, check an oscillator, or translate a measured frequency into musical language.

Singers and ear training

"Am I actually singing the note I think I am?"

Singers can hold a comfortable vowel and see the nearest note, octave, and whether the pitch sits sharp or flat. The cents meter is especially useful for slow practice: aim for the center, notice which side you approach from, then repeat without staring at the screen. Because the reading is monophonic, practice in a quiet room and avoid playing accompaniment through the same microphone.

Singers and ear training
Guitar learners

"Where else can I play this note on the guitar?"

Guitar learners often memorize one fretboard shape without seeing the repeated pitches around it. Detect or select a note and the grid reveals every matching position through fret 12. Compare the same pitch on thicker and thinner strings, practice unison tuning, or use the piano highlight to connect staff notation and keyboard lessons to the guitar neck.

Guitar learners
Producers and sound designers

"What pitch is hiding in this oscillator or sample?"

Producers can type a frequency from a synthesizer, inspect a clean monophonic sample through the microphone, or click a reference piano key before tuning an oscillator. The MIDI number makes the result easy to transfer into a DAW, while the adjustable A4 reference helps when a session, sampled instrument, or ensemble does not use modern 440 Hz concert pitch.

Producers and sound designers

Music note finder questions

What the detector listens for, what stays private, and where its single-note focus ends.

The analysis itself is fully local and needs no server connection. After the page and its assets have loaded, microphone detection, frequency conversion, piano lookup, and guitar mapping run in your browser. Whether the page can be reopened with no connection depends on your browser cache and the site's offline behavior, but no analysis request is sent over the network.
No. The microphone stream is read as short waveform snapshots by the Web Audio API. The page does not build an audio recording, upload a file, call an external recognition service, or store what you play. The media tracks and AudioContext are stopped when you press Stop, switch away from the microphone input, or leave the page.
Pitch detection needs a stable fundamental frequency. Background noise, room echo, breath noise, vibrato, distortion, percussion, and nearby harmonics can compete with it. Move closer to the microphone, play one sustained note at a moderate level, mute other strings, and avoid speakers in the same room. The finder smooths readings and hides low-confidence frames, but it cannot turn a complex sound into a perfectly stable single pitch.
No. This page intentionally identifies one note at a time. A chord contains several simultaneous pitches, while a song key depends on harmony and musical context across time. For an uploaded recording, use the Audio Key Finder instead: it estimates the key and scale of a whole song. Keeping the two jobs separate makes the result and limitations much clearer.
Use 440 Hz unless you know your instrument, ensemble, score, or recording uses another reference. 442 and 443 Hz are common in some orchestras, 415 Hz is often used for Baroque performance practice, and 432 Hz appears in some modern tuning preferences. Changing the reference does not alter the incoming sound; it changes the equal-tempered target frequencies and the cents reading used to judge that sound.
Yes, when the instrument produces one reasonably clear pitch inside the live range of 55 to 2,093 Hz. Bass notes at or above A1 are supported, and violin, viola, cello, woodwinds, brass, and many synthesizer tones usually fall comfortably inside the range. Very low fundamentals, noisy attacks, multiphonics, double stops, and strongly distorted sounds may not produce a stable reading.

Name the note, then find where to play it

Use your microphone, enter a frequency, or click a piano key. The complete result stays in your browser.